Immediate Scrap Recovery
Process suitable sprues, runners or trim close to the production equipment.
MACHINE-SIDE RECYCLING
Beside-the-Press & Inline Plastic Granulators
Compact granulation solutions installed beside or directly connected to production equipment for immediate recycling of sprues, runners, edge trim and thermoforming scrap.
WHY MACHINE-SIDE RECYCLING
Why Use a Beside-the-Press Granulator?
A beside-the-press granulator is installed close to production equipment so suitable scrap can be processed near its source. Low-speed screenless units suit intermittent sprues and runners; continuous inline arrangements suit ongoing edge trim or thermoforming scrap.
Reduced Material Handling
Machine-side granulation reduces the distance scrap must travel for processing.
Closed-Loop Regrind
Collect suitable regrind for evaluation and possible return to production.
Compact Installation
Select a beside-the-press or inline layout around the available floor space and scrap route.
JW CRUSHER EQUIPMENT
JW Machine-Side & Inline Granulators
Match the production process and scrap form to a machine-side or continuous inline configuration.
Machine-side / inline granulator
Low-Speed Screenless Granulator
A 23 rpm screenless machine-side option for sprues and runners, with low-dust handling and consistent regrind.
View Details
Machine-side / inline granulator
Sheet Edge Trim Inline Granulator
Continuous roll-feed granulation for sheet edge trim beside a sheet production line.
View Details
Machine-side / inline granulator
Thermoforming Scrap Granulator
Continuous granulation of thermoforming skeleton, punched web and production trim.
View DetailsAPPLICATION → SCRAP → MACHINE
Choose by Production Process
Injection Molding
Sprues & runners
Low-Speed Screenless Granulator →Sheet Production
Continuous edge trim
Sheet Edge Trim Granulator →Thermoforming
Skeleton scrap
Thermoforming Granulator →CLOSED-LOOP RECYCLING
From Production Scrap to Reusable Regrind
Machine-side granulation can reduce scrap handling and support closed-loop reuse of suitable production regrind. Reuse conditions depend on material and process requirements.
- Production Scrap
- Machine-Side Feeding
- Granulation
- Consistent Regrind
- Return to Production
REAL PROCESS FOOTAGE
Real Inline Recycling & Sprue Tests
The footage shows confirmed materials and processes. The ABS sprue test does not identify the machine model used.
INLINE SOLUTION
PP Sheet Edge Trim Inline Recycling
PP sheet edge trim handling in a real machine-side recycling arrangement.
MATERIAL TEST
ABS Sprue Crushing Test
ABS sprue feeding and processed regrind are shown; equipment identification is pending.
Need a Granulator Beside Your Production Line?
Tell us your process, scrap form, size and required capacity so we can review a suitable machine-side or inline arrangement.
